Navigation System Display Module: Removal

Disconnect the battery ground cable. Refer to Specifications information.
Remove the instrument panel center reinforcement trim panel.
- Release from the 5 clips.

CAUTION: Protect the surrounding trim from damage when changing the component.

Release the navigation system module bracket.
- Remove the 4 Torx screws.
- Disconnect the 10 electrical connectors.
- Release the assembly.

NOTE: Do not disassemble further if the component is removed for access only.

Remove the navigation screen module.
- Remove the trim panel veneer upper retaining clip.
- Remove the 2 Torx screws.
- Remove the 4 Torx bolts.