SDD Does Not Progress While Attempting To Update The ISC Using SDD 158.06 (SSM74640)
Publication date: 2019-12-18Reference number: SSM74640
SDD DOES NOT PROGRESS WHILE ATTEMPTING TO UPDATE THE ISC USING SDD 158.06
TECHNICAL SERVICE BULLETIN
Reference Number(s): SSM74640, Date of Issue:
December 18, 2019
| JAGUAR: | XF/X260; XJ/X351 |
| SERVICE CATEGORY: | Diagnostic Software Hardware |
ISSUE
When attempting to complete either of the routines that follow:
- 'Configure existing module - Update to Phase 4: InControl Touch Pro'
- 'Configure new module - Update to Phase 4: InControl Touch Pro infotainment slave controller'
SDD correctly displays the software resolution screen, once the user selects the green tick, the following screen seems to pause. SDD does not continue to load the files to the USB flash drive.
CAUSE
There is an error within the software resolution.
PERMANENT CORRECTIVE ACTION
This concern has been resolved with the release of SDD version 159.00. The manual patch will no longer be available to download and this SSM will be deleted in 7 days.