FixVault
Home › Jaguar › 2012 › XK 2D Convertible › Repair and Diagnosis › External Pages › Different car › Section 29 (MULTIFUNCTION Electronic Modules) › MULTIFUNCTION Electronic Modules › Removal And Installation › Remote Keyless Entry (RKE) Module › Installation

Remote Keyless Entry (RKE) Module: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the keyless entry module.
    • Connect the electrical connectors.
    • Install the screws.
  2. Install the RH side footwell trim panel.
    • Carefully secure the clips.
  3. Connect the battery ground cable and install the cover. Refer to SPECIFICATIONS information.
  4. Connect WDS to the vehicle and configure a new module.
About FixVault