FixVault
Home › Jaguar › 2013 › XK Base, 2D Convertible › Repair and Diagnosis › External Pages › Different car › Section 29 (MULTIFUNCTION Electronic Modules) › MULTIFUNCTION Electronic Modules › Removal And Installation › Information And Entertainment Module › Removal

Information And Entertainment Module: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. Refer to SPECIFICATIONS information.
  2. Remove the instrument panel center reinforcement trim panel.
    • Release from the 5 clips.
      GJ0009187
    3. CAUTION: Protect the surrounding trim from damage when changing the component.
  3. Release the navigation system module bracket.
    • Remove the 4 Torx screws.
    • Release the assembly.
      GJ0009188
  4. Remove the information and entertainment module.
    • Remove the 4 Torx bolts.
    • Disconnect the 2 electrical connectors.
      GJ0009383
About FixVault