FixVault
Home › Jaguar › 2013 › XK Base, 2D Convertible › Repair and Diagnosis › External Pages › Different car › Section 3 (Supplemental Restraint System) › Supplemental Restraint System › Removal And Installation › Restraints Control Module (RCM) › Installation

Restraints Control Module (RCM): Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the RCM.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    • Connect the electrical connectors.
  2. Install the keyless vehicle antenna. Refer to Keyless Vehicle Antenna information.
  3. Connect the battery ground cable and install the cover. Refer to SPECIFICATIONS information.
  4. Using WDS, configure a new module.
About FixVault