ATEQ TPMS Reset Procedure

If tire pressure sensor is replaced on a road wheel, the sensor will be learned by the system when the vehicle is first driven for more than 15 minutes above 18 mph (25 kph). This is called auto-location. If the vehicle speed is decreased while the auto-location function is activated, the learn process timer will be suspended until the vehicle reaches the required speed. If the required speed is not reached for more than 15 minutes, the learn process timer will be set to zero and will restart once the required speed is reached.

1. Set the tire pressure of all wheels to pressure specified on the tire and loading information label.
2. Ensure the vehicle remains stationary for at least 15 minutes after replacing sensor(s).
3. Drive the vehicle for more than 15 minutes above 18 mph (25 kph).
4. Remain stationary for another 15 minutes to activate full TPMS operation.