Turning Angle Adjustment
WARNING: This page is about a different car, the 1987 Jeep Pickup and 1987 Jeep Grand Wagoneer. However, it is still accessible from the selected car via links, so may be relevant.
- The turning angle stop screws are located on back side of steering knuckle, just above axle centerline. To adjust, loosen lock nut on stop screw.
- Using full-floating turn table under each wheel, adjust stop screw IN to increase turning angle and OUT to decrease turning angle. Tighten lock nut.
TURNING ANGLE ADJUSTMENT
| Application | Left Wheel | Right Wheel |
|---|---|---|
| Grand Wagoneer & Trucks | 36-37° | 36-37° |