Test VER-1C - Anti-Lock Warning Light Circuit
- Set parking brake. If Red BRAKE warning light is off, repair fused ignition feed circuit to warning lights. Perform verification test TEST VER-1A . If Red BRAKE warning light is on, turn ignition off. Disconnect and inspect CAB 55-pin connector. Repair connector as necessary.
- Turn ignition on. Connect a jumper wire between terminal No. 52 (Violet wire) and ground. Check ANTI-LOCK warning light. If ANTI-LOCK warning light is on, replace CAB. Perform TEST VER-1A .
- If ANTI-LOCK warning light is off, inspect ANTI-LOCK warning light bulb. Replace bulb as necessary. Perform TEST VER-1A . If bulb is okay, repair open Violet wire. Perform TEST VER-1A .