Cruise Control Switch - ZJ Models
Access cruise control switch. See Figure . Disconnect cruise control switch 4-pin connector. Using an ohmmeter, check cruise control switch. If cruise control switch does not test as specified, replace switch. See TESTING CRUISE CONTROL SWITCH .
NOTE:
Testing of cruise control switch without DRB-II on XJ models is not provided by manufacturer.
TESTING CRUISE CONTROL SWITCH
| Switch Position | Check Between Pin Nos. | Ohms | ||||
|---|---|---|---|---|---|---|
| OFF | 3 & 4 | 5890-6510 | ||||
| OFF | 1 & 3 | (1) | ||||
| ON | 1 & 4 | 5890-6510 | ||||
| ON | 1 & 3 | (2) | ||||
| ON/SET | 3 & 4 | 1020-1130 | ||||
| ON/RESUME | 3 & 4 | 2040-2260 | ||||
|
||||||