FixVault
Home › Jeep › 1993 › Cherokee Country, 2D Utility, Standard › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System › Testing › Test VER-1 - Verification Test

Test VER-1 - Verification Test

  1. Verify system operation. Ensure all doors, hood and liftgate are closed. Open driver's door. Remove ignition key from vehicle. Lock all doors with power door lock switch. Close driver's door. If instrument panel theft alarm "SET" light flashed, system is operational and verified. If "SET" light did not flash, 20 engine start cycles have not occurred or theft alarm system is malfunctioning.
  2. Determine if security light is flashing. If light is not flashing, go to TEST 1A  . If light is flashing, system is functioning properly
About FixVault