Front Washer Motor Test
WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Unplug washer pump connector, under washer reservoir in engine compartment. Check for continuity between harness connector terminal "B" (Black wire) and ground. See Fig 1 . If no continuity exis ts, repair open circuit in Black wire to ground.
- Connect jumper wire between terminal "B" on washer pump and a known good ground. Using jumper wire with 15-amp in-line fuse, supply battery voltage to washer pump terminal "A" (Black/Tan wire). Replace pump if it does not operate.