FixVault
Home › Jeep › 1996 › Cherokee Classic, Part Time, Automatic › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Self-Diagnostic Tests › Test VER-1A - System Verification Test

Test VER-1A - System Verification Test

  1. Disconnect all jumper wires. Reconnect all disconnected connectors and components. Reinstall all removed relays. Replace any blown fuses. Using scan tool, clear DTCs. Turn ignition off, then on.
  2. Using scan tool, read DTCs display for 3 minutes. If scan tool does not display any ABS DTCs, go to next step. If scan tool displays any ABS DTCs, perform TEST 1A .
  3. Disconnect scan tool from vehicle and road test vehicle for at least 5 minutes. Perform several Anti-Lock Brake stops and Traction Control starts (if equipped).
  4. After road test, reconnect scan tool. Turn ignition on. Read DTCs display for 3 minutes. If scan tool does not display any ABS DTCs, complaint cannot be duplicated at this time. Testing is complete. If scan tool displays any ABS DTCs, perform TEST 1A .
About FixVault