Vehicle Preparation
WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
- Set parking brake. Set shift lever to Park position. Start and idle engine at 700 RPM. Set A/C controls to outside air, panel (vent) mode, full cool, and A/C button on. Set blower to high speed. Open windows. Set recirculated air button to off position.
- Operate system for a few minutes to allow system to stabilize. Place a piece of cardboard over front part of condenser. This will stop cooling fans from alternating speeds and maintain A/C pressure at 260 psi (18.3 kg/cm2 ).