FixVault
Home › Jeep › 1996 › Cherokee Classic, Part Time, Standard › Repair and Diagnosis › External Pages › Different car › Section 29 (A/C-Heater System - Automatic) › Testing › In-Vehicle Temperature Sensor

In-Vehicle Temperature Sensor

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate in-vehicle temperature sensor aspirator behind name plate, on right side of instrument panel. Turn ignition on. Press OFF button on A/C-heater control panel. Place a small piece of tissue paper in front of sensor opening.
  2. If paper sticks to sensor opening, in-vehicle temperature sensor aspirator is working properly. If tissue paper does not stick, inspect in-vehicle temperature sensor. Go to TEST 9A: ATC ASPIRATOR & IN-CAR TEMPERATURE SENSOR to test sensor and aspirator. See TROUBLE SHOOTING.
  3. Inspect for presence and condition of 2 foam seals. One seal is located behind name plate. The other is located near right center duct opening. Replace or repair seals as necessary.
About FixVault