Power Lumbar Switch Test

Remove power lumbar switch. See POWER LUMBAR SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, verify switch continuity is as specified in POWER LUMBAR SWITCH CONTINUITY . See Fig 1 . If switch does not test as specified, replace faulty switch. If switch tests as specified, go to POWER LUMBAR ADJUSTER/MOTOR TEST .

Fig 1: Identifying Power Lumbar Switch Terminals

Courtesy of CHRYSLER CORP.

POWER LUMBAR SWITCH CONTINUITY

Switch Position	Continuity Between Terminals No.
Neutral	1 & 4; 2 & 5
Forward	1 & 4; 3 & 5
Rearward	1 & 3; 2 & 5