Power Window Switch

NOTE: The following test is for rear door power window switches. Front door power window switches are integral to door modules. For front door power window switch testing, see DOOR MODULE .

Disconnect negative battery cable. Remove rear power window switch from door trim panel. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. With switch in specified position, check switch continuity. See REAR POWER WINDOW SWITCH CONTINUITY . See Fig 1 . Replace switch as necessary. If switch is okay, go to POWER WINDOW MOTOR .

Fig 1: Identifying Rear Power Window Switch Terminals

Courtesy of CHRYSLER CORP.

REAR POWER WINDOW SWITCH

Switch Position	Check Continuity Between Terminals No.
All Positions	3 & 6
Off	1 & 2; 4 & 5
Up	1 & 2; 5 & 6
Down	2 & 6; 4 & 5