Inactive DTC Condition

WARNING: This page is about a different car, the 1999 Dodge Pickup and 1999 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

This procedure applies if you have been sent here from self-diagnostic tests and have just attempted to simulate condition that initially set DTC. The following additional checks may assist in identifying a possible intermittent problem:

Visually inspect related component connectors for broken, bent, pushed-out or corroded terminals.
Visually inspect related wiring harness connectors for broken, bent, pushed-out or corroded terminals.
Visually inspect related wiring harnesses for chafed, pierced or partially broken wires.
Check for pertinent Technical Service Bulletins (TSBs) relating to the problem.