Test 18A - Bus Open
WARNING: This page is about a different car, the 1996 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect Body Control Computer (BCM) connectors. BCM is located under left side of instrument panel. Connect jumper wire between ground and BCM Black connector, terminal No. 19 (Violet/Brown wire). Using scan tool, select SYSTEM MONITOR. Perform CCD BUS test. If scan tool does not display BUS SHORT TO GROUND, repair open Violet/Brown wire. If scan tool displays BUS SHORT TO GROUND, go to next step.
- Move jumper wire to BCM Black connector, terminal No. 20 (White/Black wire). Perform CCD BUS test. If scan tool does not display BUS SHORT TO GROUND, repair open White/Black wire. If scan tool displays BUS SHORT TO GROUND, replace scan tool cable or scan tool.