FixVault
Home › Jeep › 1999 › Cherokee Classic, 2.5 P › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Vehicle Communication System › System Tests › Verification Test: VER-2A › Body Verification Test

Body Verification Test

  1. Reconnect all previously disconnected components and connectors. If BCM was replaced, turn ignition on for at least 15 seconds.
  2. Ensure ignition is on. Erase all DTCs using scan tool. Turn ignition off and wait 5 seconds. Turn ignition on and fully operate system that was malfunctioning.
  3. If system is not operating properly, go to SYSTEM TESTS  . Using scan tool, read Body DTCs. If any DTCs are present, go to SYSTEM TESTS  . If no DTCs are present, system is operating correctly and customer's complaint cannot be duplicated, repair is complete.
About FixVault