FixVault
Home › Jeep › 2000 › Cherokee Limited, 2D Pickup › Repair and Diagnosis › Electrical › Gauges › Instrument Panel › System Tests › Turn Signal Indicator Light Test

Turn Signal Indicator Light Test

  1. Disconnect negative battery cable. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Connect negative battery cable. Actuate hazard warning switch.
  2. Check for battery voltage at instrument cluster connector C2 terminal No. 6 (Tan wire) and connector C1 terminal No. 10 (Light Green/White wire). There should be a switching battery voltage signal. If battery voltage does not exist, repair open circuit between turn signal switch and instrument cluster. If battery voltage exists, replace faulty bulb(s).
About FixVault