EVIC Dimming Inoperative

Possible Causes are:

• ILLUMINATION BULB OR SOCKET
• ELECTRONIC VEHICLE INFORMATION CENTER

Diagnose and repair any BCM, EVIC, or Communication DTCs before proceeding with this test. Turn ignition off. Remove and inspect the illumination bulb(s) that is inoperative. Is there a problem with the bulb or socket? If yes, replace the illumination bulb(s) or socket(s) as necessary. Perform BODY VERIFICATION TEST VER 1  under VERIFICATION TESTS. If no, replace, program, and calibrate the EVIC. Perform BODY VERIFICATION TEST VER 1  under VERIFICATION TESTS.