FixVault
Home › Jeep › 2003 › Grand Cherokee Overland › Repair and Diagnosis › Electrical › Body Electrical › Power Distribution › Power Outlet › Removal

Power Outlet: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the center lower bezel from the instrument panel. Refer to INSTRUMENT PANEL CENTER BEZEL-LOWER for the procedure.
  3. Pull the cigar lighter knob and element or the protective cap out of the cigar lighter receptacle base, or open the power outlet door in the instrument panel center lower bezel.
  4. Look inside the cigar lighter or power outlet receptacle base and note the position of the rectangular retaining bosses of the mount that secures the receptacle base to the instrument panel center lower bezel (Figure ).
  5. Insert a pair of external snap ring pliers into the cigar lighter or power outlet receptacle base and engage the tips of the pliers with the retaining bosses of the mount.
  6. Squeeze the pliers to disengage the mount retaining bosses from the receptacle base and, using a gentle rocking motion, pull the pliers and the receptacle base out of the mount.
  7. Remove the cigar lighter or power outlet mount from the instrument panel center lower bezel.
About FixVault