FixVault
Home › Jeep › 2003 › Grand Cherokee Overland › Repair and Diagnosis › Steering › Power Steering › Power Steering Pump › Pump › Installation › Installation - 4.7L Engine

Installation - 4.7L Engine

  1. Position the pump on the left cylinder head and install bolts through pulley access holes. Tighten bolts to 28 N.m (21 ft. lbs.).
  2. Install the pressure and return hoses to pump.
  3. Install serpentine drive belt (Refer to ACCESSORY DRIVE ).
  4. Add power steering fluid (Refer to STANDARD PROCEDURE ).
About FixVault