IOD Fuse: Removal

The Ignition-Off Draw (IOD) fuse is removed from Power Distribution Center (PDC) fuse cavity #15 when the vehicle is shipped from the assembly plant. Dealer personnel must install the IOD fuse when the vehicle is being prepared for delivery in order to restore full electrical system operation.

1. Turn the ignition switch to the Off position.
2. Unlatch and open the cover from the PDC.
3. Remove the IOD fuse from fuse cavity #15 of the PDC.
4. Store the removed IOD fuse by inserting the terminal blades of the fuse into the empty fuse cavity #11 of the PDC.
5. Close and latch the cover onto the PDC.