FixVault
Home › Jeep › 2003 › Wrangler X, Standard › Repair and Diagnosis › Body & Frame › Seats › Seat System › Front Seat › Installation

Front Seat: Installation

  1. Position the seat in the vehicle.
  2. Install the bolts attaching the rear of seat frame to the floor panel. Tighten outboard bolt to 33 N.m (25 ft. lbs.). Tighten inboard bolt to 74 N.m (55 ft. lbs.).
  3. Install the bolts attaching the front of seat frame to the floor panel and tighten bolts to 33 N.m (25 ft. lbs.).
  4. Engage seat belt electrical connector.
About FixVault