FixVault
Home › Jeep › 2003 › Wrangler X, Standard › Repair and Diagnosis › Electrical › Body Electrical › Power Distribution › Power Distribution Center › Disassembly › Power Distribution Center Disassembly › PDC Relay Wedge Removal

PDC Relay Wedge Removal

  1. Remove the PDC housing lower cover.
  2. Remove each of the relays from the PDC relay wedge to be removed.
  3. From the bottom of the PDC housing, use a small screwdriver or a terminal pick tool (Special Tool Kit 6680) to release the two latches (yellow) that secure the relay wedge to the PDC relay cassette.
  4. From the top of the PDC housing, remove the relay wedge from the PDC relay cassette (Figure).
About FixVault