FixVault
Home › Jeep › 2004 › Grand Cherokee Overland, AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Adjustable Pedals Module › Installation

Adjustable Pedals Module: Installation

  1. Install the module on the mounting pins in the vehicle.
  2. Reconnect the electrical connector.
  3. Install the two mounting clips for the module (Figure ).
  4. Install the adjustable pedal motor. (Refer to ADJUSTABLE PEDALS ).
  5. Install the steering column opening cover (Refer to STEERING COLUMN OPENING COVER ).
  6. Install the cluster bezel (Refer to CLUSTER BEZEL ).
  7. Reconnect the negative battery cable.
About FixVault