FixVault
Home › Jeep › 2004 › Grand Cherokee Overland, AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Door Module › Installation

Door Module: Installation

  1. Position the door module onto the front door trim panel.
  2. Install the door module to the back of the front door trim panel (Figure ). Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Reinstall the trim panel onto the front door. (Refer to TRIM PANEL ).
  4. Reconnect the battery negative cable.
About FixVault