FixVault
Home › Jeep › 2004 › Grand Cherokee Overland, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules › Controller Antilock Brake › Removal

Controller Antilock Brake: Removal

  1. Remove negative battery cable from the battery.
  2. Remove air cleaner housing, (Refer to AIR CLEANER HOUSING ) OR (Refer to AIR CLEANER HOUSING ).
  3. Release CAB harness connector and remove connector (Fig 1 ).
    Fig 1: Locating CAB Connector Release
    G03574712Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove pump motor connector.
  5. Remove CAB mounting bolts (Fig 2 ) and remove the CAB from the HCU.
    Fig 2: Removing CAB Mounting Bolts
    G03574713Courtesy of DAIMLERCHRYSLER CORP.
About FixVault