FixVault
Home › Jeep › 2004 › Grand Cherokee Overland, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules › Memory Heated Seat/Mirror Module › Removal

Memory Heated Seat/Mirror Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the driver side front bucket seat from the power seat track unit. Refer to SEAT TRACK ADJUSTER .
  3. Lift the heated seat module off of the power seat track and disconnect the power seat wire harness connectors (Fig 1 ).
    Fig 1: Heated Seat Module Remove/Install
    G03574717Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the module from the bracket.
About FixVault