FixVault
Home › Jeep › 2004 › Grand Cherokee Overland, AWD › Repair and Diagnosis › Body & Frame › Seats › Power Seat System › Memory Set Switch › Installation

Memory Set Switch: Installation

  1. Position the memory switch onto the back of the driver side front door trim panel.
  2. Install and tighten the two screws that secure the memory switch to the back of the driver side front door trim panel. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Reconnect the memory switch wire harness connector to the driver door module connector receptacle.
  4. Install the trim panel onto the driver side front door. Refer to TRIM PANEL for the procedure.
  5. Reconnect the battery negative cable.
About FixVault