FixVault
Home › Jeep › 2004 › Grand Cherokee Overland, AWD › Repair and Diagnosis › Body & Frame › Seats › Power Seat System › Memory Set Switch › Removal

Memory Set Switch: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim panel from the driver side front door. Refer to TRIM PANEL for the procedure.
  3. Disconnect the memory switch wire harness connector from the driver door module connector receptacle.
  4. Remove the two screws that secure the memory switch to the back of the driver side front door trim panel.
  5. Remove the memory switch from the back of the driver side front door trim panel.
About FixVault