FixVault
Home › Jeep › 2004 › Liberty Limited, 4WD, Part Time › Repair and Diagnosis › Electrical › Charging Systems › Battery System › Thermal Guard › Installation

Thermal Guard: Installation

  1. Clean and inspect the battery thermal guard. Refer to CLEANING  for the proper cleaning procedures, and refer to INSPECTION  for the proper inspection procedures.
  2. Carefully and evenly slide the battery thermal guard down over the battery case.
  3. Install the battery and the battery thermal guard into the battery tray as a unit. Refer to BATTERY  for the proper battery installation procedures.
About FixVault