FixVault
Home › Jeep › 2004 › Liberty Limited, 4WD, Part Time › Repair and Diagnosis › External Pages › Different car › Section 119 (Engine Cooling System) › PWM Fan Control Module - 4.0L › Installation

PWM Fan Control Module - 4.0L: Installation

WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position relay to body and install 2 bolts. Tighten bolts to 3 N.m (25 in. lbs.) torque.
  2. Connect electrical connector to relay.
  3. Connect vacuum hose to reservoir.
  4. Install reservoir and tighten 2 bolts to 3 N.m (25 in. lbs.) torque.
  5. Install front bumper and grill assembly.
About FixVault