FixVault
Home › Jeep › 2004 › Liberty Limited, 4WD, Part Time › Repair and Diagnosis › External Pages › Different car › Section 145 (Fuel Injection System) › O2S Heater Relay › Removal

O2S Heater Relay: Removal

WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove PDC cover.
  2. Remove relay from PDC.
  3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
  4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.
About FixVault