Latch - Control Assembly: Installation
WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Install the control assembly.
- Install the three bolts and tighten to 10 N.m (90 in. lbs.).
- Connect the outside handle link.
- Connect the latch cables.
- Connect the electrical connector.
- Adjust the outside handle. (Refer to ADJUSTMENTS )
- Adjust the latch cables. (Refer to ADJUSTMENTS )
- Install the liftgate insulator pad. (Refer to LIFTGATE INSULATOR PAD )