Compass Mini/Trip Computer: Operation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

The compass mini-trip computer operates when the ignition is in the ON position. The VFD will display the last display before ignition was turned OFF. The four outer buttons operate:

STEP
C/T - Compass/Temperature
US/M - English/Metric
RESET
1. STEP BUTTON
  Pressing the STEP button selects one of the following 6 displays:
  - Average fuel economy
  - Distance to empty
  - Trip odometer
  - Elapsed time
  - Blank Screen
2. C/T (COMPASS/TEMPERATURE) BUTTON
  Pressing the C/T button selects the Compass/Temperature display.
3. US/M (ENGLISH/METRIC MEASUREMENT) BUTTON
  Pressing the US/M button switches the display units between English and Metric readings.
4. RESET BUTTON
  Pressing the RESET button resets the function on the display, provided that function can be reset. The functions which can be reset are Average fuel economy, Trip odometer and Elapsed time.
  
  Global Reset This feature allows all three displays (Average fuel economy, Trip odometer and Elapsed time) to be reset easily, by pressing the RESET button twice within three seconds with any of the screens in display. This eliminates the need to reset each display individually.
  
  The RESET button is also used to set the variance and/or calibrate the compass. Refer to COMPASS CALIBRATION procedure and to set the variance, refer to COMPASS VARIATION ADJUSTMENT .
  
  For more information on the features, control functions and setting procedures for the CMTC module, see the owner's manual.