Installation - Front
- Install the regulator assembly.
- Connect the electrical connector.
- Tighten the bolts to 9 N.m (80 in. lbs.). For the passenger side regulator, tighten bolts in the following sequence, at the following positions; 12 o'clock, 6 o'clock, then 9 o'clock position. For the driver side regulator, tighten bolts in the following sequence, at the following positions; 12 o'clock, 6 o'clock, then 3 o'clock position.
- Connect the runout tube clip.
- Remove the glass support and connect to the regulator lift plate.
- Install the waterdam. See WATERDAM .