FixVault
Home › Jeep › 2004 › Liberty Limited, RWD › Repair and Diagnosis › External Pages › Different car › Section 122 (Electronic Control Modules) › Adjustable Pedals Module › Removal

Adjustable Pedals Module: Removal

WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the cluster bezel (Refer to CLUSTER BEZEL ).
  3. Remove the steering column opening cover (Refer to STEERING COLUMN OPENING COVER ).
  4. Remove the adjustable pedal motor for accessibility. (Refer to ADJUSTABLE PEDALS ).
  5. Remove the two mounting clips from the module (Fig 1 ).
    Fig 1: Identifying Adjustable Pedals Module
    G03574708Courtesy of DAIMLERCHRYSLER CORP.
  6. Disconnect the electrical connector.
  7. Remove the adjustable pedal module.
About FixVault