FixVault
Home › Jeep › 2004 › Wrangler Rubicon, Standard › Repair and Diagnosis › Engine Performance › System › Powertrain Diagnostic Procedures › Starting › *Start And Stall Condition › Possible Causes

Possible Causes

  1. CHECKING DTCS
  2. CHECKING SKIM DTCS
  3. TP SENSOR SWEEP
  4. TP SENSOR VOLTAGE GREATER THAN 0.92 VOLTS WITH THROTTLE CLOSED
  5. ECT SENSOR OPERATION
  6. OTHER POSSIBLE CAUSES FOR START & STALL
  7. FUEL CONTAMINATION
About FixVault