FixVault
Home › Jeep › 2005 › Liberty Limited, 2.8 5, Part Time › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Engine Control Module-Diesel Engine › Standard Procedure › Standard Procedure - Pcm/ECM/Skim Programming - Diesel › Pcm/Skim Programming

Pcm/Skim Programming

When a PCM (JTEC) and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new PCM (JTEC)
  2. Program the new SKIM
  3. Replace all ignition keys and program them to the new SKIM.
About FixVault