Boost Pressure Sensor: Removal

1. Disconnect negative battery cable.
2. Remove engine cover and bracket assembly (Refer to ENGINE COVER - REMOVAL) or (Refer to ENGINE COVER - REMOVAL) or (Refer to ENGINE COVER - REMOVAL) .
3. Disconnect sensor electrical connector. See Fig 1.
4. Remove retaining bolts and remove sensor from cylinder head cover/intake manifold. See Fig 1.

Fig 1: SENSOR LOCATIONS

Courtesy of DAIMLERCHRYSLER CORP.

1 - BOOST PRESSURE/INTAKE AIR TEMPERATURE SENSOR

2 - FUEL RAIL PRESSURE SENSOR