FixVault
Home › Jeep › 2005 › Liberty Limited, 2.8 5, Part Time › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection - 2.8L Diesel › Boost Pressure Sensor › Installation

Boost Pressure Sensor: Installation

  1. Install sensor and retaining bolts into cylinder head cover/intake manifold. See Figure. Torque to 5.4 N.m (48 in. lbs.).
  2. Connect sensor electrical connector. See Figure.
  3. Install engine cover and bracket assembly (Refer to INSTALLATION (2.4L) or INSTALLATION (2.8L) or INSTALLATION (3.7L)).
  4. Connect negative battery cable.
About FixVault