FixVault
Home › Jeep › 2005 › Liberty Limited, 2.8 5, Part Time › Repair and Diagnosis › Suspension › Wheel Alignment › Suspension System › Front › Stabilizer Link › Removal

Stabilizer Link: Removal

  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the lower stabilizer link bolt at the lower control arm.
  4. Remove the upper stabilizer link bolt at the stabilizer bar.
  5. Remove the stabilizer link. See Fig 1
Fig 1: STABILIZER BAR LINK
GC0024962Courtesy of DAIMLERCHRYSLER CORP.
1 - STABILIZER BAR
2 - STABILIZER BAR LINK
About FixVault