FixVault
Home › Jeep › 2006 › Commander Base, 3.7 K, AWD › Repair and Diagnosis › Electrical › Gauges › Overhead Console › Sensor-Ambient Air Temperature › Removal

Sensor-Ambient Air Temperature: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the grille, (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .
  3. Disconnect the wire harness connector from the ambient temperature sensor.
  4. Release the ambient temperature sensor from the retaining bracket.
  5. Remove the ambient temperature sensor from the vehicle.
About FixVault