FixVault
Home › Jeep › 2006 › Commander Base, 3.7 K, AWD › Repair and Diagnosis › External Pages › Different car › Section 105 (5.7L Engine (Service Information)) › Engine Mounting › Mount-Rear › Removal › 4X4

Engine Mounting: Mount-Rear: Removal: 4X4

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Rear Mount (4X4)
GC0027234Courtesy of CHRYSLER LLC
  1. Raise the vehicle on a hoist.
  2. Using a suitable jack, support transmission.
  3. Remove the crossmember.
  4. Remove the fasteners (2) from the transmission mount (1) to transmission.
  5. Remove the mount.
About FixVault