FixVault
Home › Jeep › 2006 › Commander Base, 3.7 K, AWD › Repair and Diagnosis › External Pages › Different car › Section 11 (Fuel System) › Fuel Injection - Gas › Motor-Idle Air Control › Installation

Motor-Idle Air Control: Installation

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Idle Air Control Motor & TPS - 3.7L V-6
GC0006577Courtesy of DAIMLERCHRYSLER CORP.
  1. Install IAC motor (2). See Fig 1to throttle body.
  2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque (4).
  3. Install electrical connector.
  4. Install air resonator to throttle body.
About FixVault