FixVault
Home › Jeep › 2006 › Commander Base, 3.7 K, AWD › Repair and Diagnosis › External Pages › Different car › Section 121 (Ignition System (Service Information)) › Plug-Glow › Installation › Glow Plug

Glow Plug

WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install glow plug. Tighten glow plugs to 12 Nm (106 lbs. in.).
  2. Connect glow plug electrical connector (1).
  3. Install engine cover. Refer to INSTALLATION .
  4. Connect negative battery cable.
About FixVault