Standard Procedure - Programming The Pcm/ECM Using The STARSCAN®
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Read all notes and cautions for programming procedures.
(Refer to ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)
.
- Connect a battery charger to the vehicle.
- Connect the StarSCAN®.
- Select "ECU View".
- Select "WCM Wireless Control Module".
- Select "Miscellaneous Functions".
- Select "PCM Replaced".
- Enter the PIN when prompted.
- Press "Next".
- Cycle the Key.
- Verify the repair.