Service Information: Specifications: Torque
WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE CHART 6.1L ENGINE
| DESCRIPTION | N.m | Ft. | In. |
| Lbs. | Lbs. | ||
| Block Pipe Plugs (1/4 NPT) |
20 | - | 177 |
| (3/8 NPT) | 27 | - | 240 |
| Camshaft Sprocket-Bolt | 122 | 90 | - |
| Camshaft Tensioner Plate-Bolts | 28 | - | 250 |
| Timing Chain Case Cover-Bolts | 28 | - | 250 |
| Lifting Stud | 55 | 40 | - |
| Connecting Rod Cap-Bolts | 45 plus 60° Turn |
33 plus 60° Turn |
- |
| Main Bearing Cap-Bolts M-12 |
28 plus 90° Turn |
- | - |
| Crossbolts M-8 |
21.5 | - | - |
| Cylinder Head-Bolts M-12 Bolts |
|||
| Step 1 | 34 | 25 | - |
| Step 2 | 54 | 40 | - |
| Step 3 | Turn 90° | Turn 90° | - |
| M-8 Bolts | - | - | - |
| Step 1 | 20 | 15 | - |
| Step 2 | 34 | 25 | - |
| Cylinder Head Cover-Bolts | 8 | - | 70 |
| Exhaust Manifold to Cylinder Head | 31 | - | 270 |
| Flexplate to crankshaft-Bolts | 95 | 70 | - |
| Flywheel to crankshaft-Bolts | 75 | 55 | - |
| Front Insulator-Through bolt/nut | 95 | 70 | - |
| Front Insulator to Block-Bolts | 95 | 70 | - |
| Generator-Mounting Bolt | 55 | 40 | - |
| Intake Manifold-Bolts | Refer to Procedure | ||
| Lifter Guide Holder | 12 | - | 106 |
| Oil Pan Bolts | 12 | - | 105 |
| Oil Dipstick Tube | 6 | - | 53 |
| Oil Pan-Drain Plug | 27 | 20 | - |
| Oil Pump-Attaching Bolts | 28 | - | 250 |
| Oil Pump Pickup Tube - Bolt and Nut | 28 | - | 250 |
| Rear Seal Retainer Attaching Bolts | 15 | - | 132 |
| Rear Insulator to Bracket- | 68 | 50 | - |
| Rear Insulator to Crossmember | 41 | 30 | - |
| Rear Insulator to Transmission- | 68 | 50 | - |
| Rear Insulator Bracket-Bolts | 68 | 50 | - |
| Rocker Arm-Bolts | 22 | - | 195 |
| Spark Plugs | - | - | - |
| Thermostat Housing-Bolts | 28 | - | 250 |
| Throttle Body-Bolts | 12 | - | 105 |
| Vibration Damper-Bolt | 176 | 129 | - |
| Water Pump to Timing Chain | 28 | - | 250 |
| Case Cover-Bolts | |||